Tamtorque

For signs, wastebins,column doors and banners.

Tamtorque sign fixing clamps have been designed for clamping signs of all types to round, square, hexagonal or any unusual shaped post, giving a quick and reliable fix every time. They are available in seven diameters covering post sizes from 55mm to 340mm diameter without the need to cut the band to size. They do not therefore have sharp edges which can snag or cut and, unlike other banding systems, can be easily reused or readjusted. Tamtorque sign fixing clamps are manufactured from high strength stainless steel and have a hardened tamper resistant screw with a unique recessed seven sided socket. This means that they can only be tightened or released with a special Tamtorque screw bit. An auto locking safety buckle ensures the free end of the band is both safe and tidy. The unique safety buckle was developed especially for Tamtorque and is covered by patents in many countries. European Patent No 0891508. US Patent No 6205624. Other patents are pending.

Speedy, temporary replacement of vandalised column door

Band Width: 16mm (5⁄8'')
Material specification:
Band Housing, Buckle: BS304 - EN 1.4301
Screw: BS410 - EN 1.4006
Heat Treated to 1220N/mm2
Recommended Tightening Torque:
10 - 15Nm 90 - 130 lb.in

From start to finish…

  • Re-useable
  • One-man operation
  • No sharp edges to snag clothes
  • Fits round, square and hexagonal posts
  • Ideal for emergency column door replacements
  • Tamper resistant

…in 90 seconds


STANDARD RANGE
size Part No for post diameters* box
    mm ins qty
70 TTK70P 55 – 70

2 1⁄8'' – 2 3⁄4''

 50
100 TTK100P 70 – 100

2 3⁄4'' – 4

 50
130 TTK130P 100 – 130

4 – 5 1⁄8''

 50
(160) TTK160P 130 – 160

5 1⁄8'' – 6 1⁄4''

 50
190 TTK190P 130 – 190

5 1⁄8'' – 7 1⁄2''

 25
250 TTK250P 190 – 250

7 1⁄2'' – 9 7⁄8''

 25
340 TTK340P 250 – 340

9 7⁄8'' – 13 3⁄8''

 25
         
* For close fitting brackets. It will be necessary to make an allowance for the extra band length that U brackets and similar will require.
( ) = Not required for a complete range but a useful intermediate size for many applications.

 

Thread the band through the channel clamp in the sign and around the post.

Screw the band through the housing using a hand or power tool.

Push any remaining band into the buckle for a safe, tidy finish.

Hold down any excess band while finally tightening.

Tamtorque can be released and repositioned if required.