traffic  
lattix  
kapu  
Signfix Stainless Steel Channel Clips

When used in conjunction with Signfix extruded aluminium channels, Signfix clips enable signs to be fitted to posts of every shape and size. Signs manufactured using Signfix products offer greater on-site flexibility as post centres are not critical and signs can be easily offset.

Installations fabricated and erected to Signfix specifications comply with the requirements of BS En 12899-1.

Stainless steel is a tough material and is particularly beneficial where impact resistance is important

Signfix clips are manufactured from AISI 304 stainless steel alloy. All the nuts, bolts and washers are also all made from stainless steel. The stainless steel fittings have been subjected to ASTM B117 salt-spray testing for 500 hours with no significant corrosion.

Extensive service life and laboratory testing has proven the benefits of stainless steel as a clip material because it is not prone to bi-metallic corrosion and because of its superior mechanical properties (see table below:)

IMPORTANT TECHNICAL INFORMATION

Bolt Selection Guide

Signfix clips are universal and will fit any of our range of Channel Section Extrusions. To optimise the fit and to resist any tendency to twist or 'pull through' the channel under high torque, select the appropriate bolt fitting for the type of channel being used.

BOLT TYPE
 

SQUARE HEAD

LIP-LOK
LIP-LOK
CHANNELS

COMPATIBLE

OPTIMUM

Signfix bolts have an ultimate tensile strength of 70N/mm2 and should be tightened up to the adequate torque load needed for the application.

 

Material 0.2% PS N/mm.sq UTS N/mm.sq %EI
AISI 304
Stainless Steel
300 500 min 60
HE30 (6082-T6) Aluminium Alloy 255 295 7
The above figures are typical

Colour Co-ordinated

Although available from stock in stainless steel finish, Signfix clips may be powder coated to blend in with particular colour schemes, and to reduce visual impact in environmentally sensitive areas.

BOLT SIZES    
LIPLOK M8 32mm
LIPLOK M8 38mm
SQUARE HEAD M8 16mm
SQUARE HEAD M8 25mm
SQUARE HEAD M8 32mm
SQUARE HEAD M8 38mm
SQUARE HEAD M8 50mm

Useful Links

www.aptcontrols.co.uk

Terms and Conditions
SignPost Solutions Ltd | Unit 5 - Clarendon Drive | The Parkway | Tipton | DY4 0QA

TEL: + 44 (0) 121 506 4770 FAX: + 44 (0) 121 506 4771
E-MAIL: traffic@signfix.co.uk

[+] More Information [-] Close

lattix, steel posts, signal poles, sign fixing clips, sign channel, sign clips, sign bolts, cantilever systems, traffic posts, signfix, signfix systems, anti-rotational clip, sign support structure

sign masts, breakaway mounting system, aluminium sign masts, sign installation, sign brackets, channel clamps, banding, screw banding, off set brackets, hoop signs, passive safety, energy absorbent posts, the passive revolution

Signfix - Having been established since the early 1970s we have a wealth of experience in providing high quality traffic posts, clips and banding for the Uk. Signfix systems is based on the success of the patented sign channel and sign fixing clips. Other products include cantilever systems and steel posts as well as off set brackets and hoop signs. Our services include installation of breakaway mounting systems and sign installation or even lattix and passive safety systems too. In addition we have knowledge of the passive revolution and passive safety. Our expert, friendly staff are always ready to answer your questions and enquiries. Feel free to contact us today.